CHOOSE THE PRODUCT TO BE UPDATED
E238 Ara tool presetter
E238 Lynx tool presetter
E238 Pulsar tool presetter
E238 Lyra tool presetter
E450 tool presetter
E348/E348/E578 tool presetter

BIOS UPDATING SOFTWARE
BIOS.EXE

ATTENTION!
The BIOS updating is a very delicate operation that requires the presence of skilled operators as a matter of PC procedures. If wrongly or not completely   carried out, the required operations could damage the preset. In the case these operations   have negative result, please repeat this procedure starting   from the beginning,   by a manual selection of the communication port; then set the heading   “ONLY UPDATING”.
The BIOS updating may require to delete the digital read-out memory content: machines, tools sets, configuration parameters. Take the necessary precautions by noting the parameters and by saving the tools sets. (see par. 10.9 of the Instructions Manual).
Updating your preset software (BIOS) means   to have always available the most tested and reliable version.
In order to run the updating, it is necessary to link the Preset to the PC by using a “Laplink “ standard serial cable, bought or built following the instructions that will appear   on the screen during   the updating programme execution.
First of all, please check which software version is installed on your PC: it appears on the screen for about   3 seconds   at the machine starting.

In the BIOS list, please check the availability of the most recent version; then download the updating the proper file, suitable for your preset, just clicking on its relative linking.
In order to transfer the BIOS to your preset, the BIOS (BIOS.EXE.2.132 KB) updating software is required. Please find the software on the “Toolive” CD and “Gammatool” CD or you can download it by   clicking on its relative link. 
Please install and run the BIOS updating software, then follow the guided procedure.