Presetter machine software update

SETHY PRESETTER

SETHY

PAY ATTENTION!

It is a good rule, before doing the Bios updating, to make a backup of the data (machines and tools/set) which are in the 706 electronics memory, using the “Toolingup” software supplied with the presetter.
The V 4.04 is compatible with all the BIOS versions of all previous Sethy, Hathor and Ankh machines.

The BIOS versions, from V 4.0 on, do not allow to bring the electronics back to previous versions.
  • Click the "upgrade_v404.zip" button to download the Sethy presetter machine latest software version for free
  • ATTENTION: It's necessary to authenticate yourself with User Name and Password. If you are not registered yet, fill in the form by clicking on "Register" button
  • If you have lost the registration datas, send an e-mail to "customer-care@elbocontrolli.it" to receive the new credentials
  • Extract p706 and upgrade.zip files
  • Switch the 706 electronics off
  • Remove the SD card from the 706 electronics and copy the 2 files on the existing ones
  • Reinsert the SD card into the 706 electronics and switch the presetting machine on again.

WARNING! The FLASH reprogramming will be carried out; during this procedure do NOT switch the machine off

Follow us on:

📞 +39 0362 342745
📠 +39 0362 342741
🏚Elbo Controlli Srl Via San Giorgio 21 20821 Meda (MB) Italia