Support

Digital read-out software update

B4U

B4U

PAY ATTENTION!

The BIOS updating is a very delicate operation that requires the presence of skilled operators as a matter of PC procedures. If wrongly or not completely carried out, the required operations could damage the preset. In the case these operations have negative result, please repeat this procedure starting from the beginning, by a manual selection of the communication port; then set the heading “ONLY UPDATING”.

The BIOS updating may require to delete the digital read-out memory content.

Updating your preset software (BIOS) means to have always available the most tested and reliable version.
In order to run the updating, it is necessary to link the digital read-out to the PC by using a “Laplink “ standard serial cable, bought or built following the instructions that will appear on the screen during the updating programme execution.
  • First of all, please check which software version is installed on your digital read-out
  • Download the "BIOS.exe" file by clicking on the following button
  • Download the "B4U_V190.bio" file by clicking on the following button

Follow us on:

📞 +39 0362 342745
📠 +39 0362 342741
🏚Elbo Controlli Srl Via San Giorgio 21 20821 Meda (MB) Italia